Staatiline segamisotsik 600 Six10-le

WEST SYSTEM staatiline segamisotsik 600 epoliimile Six10 1tk*

*Tellimustoode

Staatiline segamisotsik kasutamiseks koos WEST SYSTEM Six10 epoksiid-liimiga.

WEST SYSTEM Six10 a static mixing wand 

Replacement static mixer for use with WEST SYSTEM Six10 Thickened Epoxy Adhesive.

The WEST SYSTEM Six10 cartridge is comprised of the cartridge body, removable nose plug and a threaded retaining nut. A 600 static mixer is included with the cartridge. (It's called a static mixer because it has no moving parts.) The cartridge fits into any standard caulk gun-manual, cordless or pneumatic-and allows simultaneous dispensing and mixing of the two-part epoxy. Manual caulking guns are graded by mechanical advantage (MA) in relation between the travel of the pistol grip and the plunger. When using the static mixer, resistance is increased. Low MA guns 3 to 8, which generally cost less, are adequate to dispense Six10 with the mixer at temperatures over 60F. If it is cooler than that, you might want a gun rated MA 12 to 26. Minimum application temperature is 50F.

Remove and save the retaining nut and plug to reuse if you are storing the unused adhesive. Be sure the plug is replaced in the original orientation to avoid cross contamination. Mark the plug and cartridge to avoid confusion.